Install Percona XtraDB Cluster on Azure Kubernetes Service (AKS)¶

This guide shows you how to deploy Percona Operator for MySQL based on Percona XtraDB Cluster on Microsoft Azure Kubernetes Service (AKS). The document assumes some experience with the platform. For more information on the AKS, see the Microsoft AKS official documentation .

Prerequisites¶

The following tools are used in this guide and therefore should be preinstalled:

Azure Command Line Interface (Azure CLI) for interacting with the different parts of AKS. You can install it following the official installation instructions for your system .
kubectl to manage and deploy applications on Kubernetes. Install it following the official installation instructions .

Also, you need to sign in with Azure CLI using your credentials according to the official guide .

Create and configure the AKS cluster¶

To create your cluster, you will need the following data:

name of your AKS cluster,
an Azure resource group , in which resources of your cluster will be deployed and managed.
the amount of nodes you would like tho have.

You can create your cluster via command line using az aks create command. The following command will create a 3-node cluster named cluster1 within some already existing resource group named my-resource-group:

$ az aks create --resource-group my-resource-group --name  cluster1 --enable-managed-identity --node-count 3 --node-vm-size Standard_B4ms --node-osdisk-size 30 --network-plugin kubenet  --generate-ssh-keys --outbound-type loadbalancer

Other parameters in the above example specify that we are creating a cluster with machine type of Standard_B4ms and OS disk size reduced to 30 GiB. You can see detailed information about cluster creation options in the AKS official documentation .

You may wait a few minutes for the cluster to be generated.

Now you should configure the command-line access to your newly created cluster to make kubectl be able to use it.

az aks get-credentials --resource-group my-resource-group --name  cluster1

Install the Operator and deploy your Percona XtraDB Cluster¶

Deploy the Operator. By default deployment will be done in the default namespace. If that’s not the desired one, you can create a new namespace and/or set the context for the namespace as follows (replace the <namespace name> placeholder with some descriptive name):

$ kubectl create namespace <namespace name>
$ kubectl config set-context $(kubectl config current-context) --namespace=<namespace name>

At success, you will see the message that namespace/<namespace name> was created, and the context (<cluster name>) was modified.

Deploy the Operator using the following command:

$ kubectl apply --server-side -f https://raw.githubusercontent.com/percona/percona-xtradb-cluster-operator/v1.14.1/deploy/bundle.yaml

Expected output

customresourcedefinition.apiextensions.k8s.io/perconaxtradbclusters.pxc.percona.com created
customresourcedefinition.apiextensions.k8s.io/perconaxtradbclusterbackups.pxc.percona.com created
customresourcedefinition.apiextensions.k8s.io/perconaxtradbclusterrestores.pxc.percona.com created
customresourcedefinition.apiextensions.k8s.io/perconaxtradbbackups.pxc.percona.com created
role.rbac.authorization.k8s.io/percona-xtradb-cluster-operator created
serviceaccount/percona-xtradb-cluster-operator created
rolebinding.rbac.authorization.k8s.io/service-account-percona-xtradb-cluster-operator created
deployment.apps/percona-xtradb-cluster-operator created

The operator has been started, and you can deploy Percona XtraDB Cluster:
```
$ kubectl apply -f https://raw.githubusercontent.com/percona/percona-xtradb-cluster-operator/v1.14.1/deploy/cr.yaml
```
Expected output
```
perconaxtradbcluster.pxc.percona.com/ cluster1 created
```
Note

This deploys default Percona XtraDB Cluster configuration with three HAProxy and three XtraDB Cluster instances. Please see deploy/cr.yaml and Custom Resource Options for the configuration options. You can clone the repository with all manifests and source code by executing the following command:
```
$ git clone -b v1.14.1 https://github.com/percona/percona-xtradb-cluster-operator
```
After editing the needed options, apply your modified deploy/cr.yaml file as follows:
```
$ kubectl apply -f deploy/cr.yaml
```
The creation process may take some time. When the process is over your cluster will obtain the ready status. You can check it with the following command:
```
$ kubectl get pxc
```
Expected output
```
NAME       ENDPOINT                   STATUS   PXC   PROXYSQL   HAPROXY   AGE
cluster1   cluster1-haproxy.default   ready    3                3         5m51s
```

Verifying the cluster operation¶

It may take ten minutes to get the cluster started. When kubectl get pxc command finally shows you the cluster status as ready, you can try to connect to the cluster.

To connect to Percona XtraDB Cluster you will need the password for the root user. Passwords are stored in the Secrets object.

Here’s how to get it:

List the Secrets objects.
```
$ kubectl get secrets
```
The Secrets object you are interested in has the cluster1-secrets name by default.
Use the following command to get the password of the root user. Substitute the <namespace> placeholder with your value (and use the different Secrets object name instead of the cluster1-secrets, if needed):
```
$ kubectl get secret cluster1-secrets -n <namespace> --template='{{.data.root | base64decode}}{{"\n"}}'
```
Run a container with mysql tool and connect its console output to your terminal. The following command does this, naming the new Pod percona-client:
```
$ kubectl run -n <namespace> -i --rm --tty percona-client --image=percona:8.0 --restart=Never -- bash -il
```
Executing it may require some time to deploy the corresponding Pod.
Now run the mysql tool in the percona-client command shell using the password obtained from the Secret instead of the <root_password> placeholder. The command will look different depending on whether your cluster provides load balancing with HAProxy (the default choice) or ProxySQL:
with HAProxy (default)with ProxySQL
$ mysql -h cluster1-haproxy -uroot -p'<root_password>'
$ mysql -h cluster1-proxysql -uroot -p'<root_password>'
This command will connect you to the MySQL server.

Troubleshooting¶

If kubectl get pxc command doesn’t show ready status too long, you can check the creation process with the kubectl get pods command:

$ kubectl get pods

Expected output

NAME                                               READY   STATUS    RESTARTS   AGE
cluster1-haproxy-0                                 2/2     Running   0          6m17s
cluster1-haproxy-1                                 2/2     Running   0          4m59s
cluster1-haproxy-2                                 2/2     Running   0          4m36s
cluster1-pxc-0                                     3/3     Running   0          6m17s
cluster1-pxc-1                                     3/3     Running   0          5m3s
cluster1-pxc-2                                     3/3     Running   0          3m56s
percona-xtradb-cluster-operator-79966668bd-rswbk   1/1     Running   0          9m54s

If the command output had shown some errors, you can examine the problematic Pod with the kubectl describe <pod name> command as follows:

$ kubectl describe pod  cluster1-pxc-2

Review the detailed information for Warning statements and then correct the configuration. An example of a warning is as follows:

Warning FailedScheduling 68s (x4 over 2m22s) default-scheduler 0/1 nodes are available: 1 node(s) didn’t match pod affinity/anti-affinity, 1 node(s) didn’t satisfy existing pods anti-affinity rules.

Removing the AKS cluster¶

To delete your cluster, you will need the following data:

name of your AKS cluster,
AWS region in which you have deployed your cluster.

You can clean up the cluster with the az aks delete command as follows (with real names instead of <resource group> and <cluster name> placeholders):

$ az aks delete --name <cluster name> --resource-group <resource group> --yes --no-wait

It may take ten minutes to get the cluster actually deleted after executing this command.

Warning

After deleting the cluster, all data stored in it will be lost!

Get expert help¶

If you need assistance, visit the community forum for comprehensive and free database knowledge, or contact our Percona Database Experts for professional support and services. Join K8S Squad to benefit from early access to features and “ask me anything” sessions with the Experts.

Community Forum Get a Percona Expert Join K8S Squad

Last update: 2024-10-16